ARCHIVE

VOLUME 12.
17 DECEMBER 2024.
  • Nurul Husna Mohd Yusoff and Aini Zuhra Abdul Kadir (2024). Accelerating digitalization: The application of artificial intellifence (AI) and its challenges in engineering field. The Engineer Story 12, 1-4.

VOLUME 11.
22 OCTOBER 2024.
  • Chong Wei Quan, Zulhanafi Paiman, Muhammad Noor Afiq Witri Muhammad Yazid (2024). Optimizing palm mid-olein-infused hydrodynamic journal bearings: Unraveling the dynamics of dimple effects on moving surfaces. The Engineer Story 11, 1-4.
  • Shao Wei Koh, Johari ND, Aini Zuhra Abdul Kadir (2024). Step-NC: A manufacturing language toward sustainable additive manufacturing. The Engineer Story 11, 5-6.
  • Muhammad Sajjad Ahmad, Muhammed Amirul Asyraf Hasnan, Nik Mohd Ridzuan Shaharuddin (2024). Effect of depth on the resistance of the Darpa suboff barehull using CFD simulation. The Engineer Story 11, 7-11.
  • Johari ND, Rosli ZM, Juoi MJ, Wan Ali WFF (2024). Effect of heat treatment temperature on the structure of brookite TiO2 film deposited via green sol-gel route for photocatalytic activity. The Engineer Story 11, 12-15.
  • Yi Ka Fong, Kai Ying Tan, Huiyi Tan, Hong Yee Kek, Keng Yinn Wong (2024). Does air supply diffuser positioning affect particle settlement on patients? Numerical assessment in operating room. The Engineer Story 11, 16-19.
  • Nazhifah Inna Salsabila, Syahrullail Samion (2024). Exploring the lubricating properties of virgin coconut oil and palm oil blends for eco-friendly applications. The Engineer Story 11, 20-23.


VOLUME 10.
18 AUGUST 2024.

VOLUME 9.
27 JUNE 2024.
  • Danial Hakeem Safarihairol, Wira Jazair Yahya and Mohamed Shukri Mohamed Ismail (2024). Exhaust emissions of a diesel engine fuelled with crude palm oil-diesel blended emulsion. The Engineer Story 9, 1-5.
  • Mohamad Isamuddin Majunit, Fazila Mohd Zawawi and Kamarulafizam Ismail (2024). Correlation between rotor blade aerodynamics and permanent magnet generator for matched off-grid wind turbine system. The Engineer Story 9, 6-9.
  • Onuchukwu GC, Norhayati A and Wan Fahmin FWA (2024). Optimizing neural network model for accurate prediction of thermal history during laser direct energy deposition of Ti-6Al-4V. The Engineer Story 9, 10-13.
  • Muhammad Amirrul Amin Moen and Norikhwan Hamzah (2024). Analysis on growth region distribution for quasi-pyrolysis synthesis of CNT in methane diffusion flame. The Engineer Story 9, 14-19.
  • Ali MHA, Shahriman AB and Mohamad MS (2024). Intake manifold design: A key factor in optimizing spark ignition engine performance. The Engineer Story 9, 20-22.

VOLUME 8.
7 MAY 2024.
  • Naufal, M.I., Gan, K.W., Israr, H.A., Nejad, A.F. and Wong, K.J., (2024). Notch-sensitivity of hybrid recycled carbon fiber composites. The Engineer Story 8, 1-4.
  • Mohd Affifudin Abdul Patar, Mohd Azlan Suhaimi and Safian Sharif (2024). Machinability assessment of 3D-printed CoCrMo plate: Influence of micro-drill bit designs. The Engineer Story 8, 5-8.
  • Adewuyi, R.A. and Aweda, JE.O., (2024). Predicting thermal behaviour of welded Cr-Mo steel flat bar: A sensitivity analysis. The Engineer Story 8, 9-14.
  • Tunji John Erinle, Adekunle Samuel Fatona and Koleola Ebenezer Ojaomo (2024). Parametric design approach for cost-effective drone solutions in Covid-19 inspection and monitoring. The Engineer Story 8, 15-23.

VOLUME 7.
27 FEBRUARY 2024.
  • Muhammad Afiq Rushdan and Izhari Izmi Mazali (2024). Development of regenerative suspension for electric vehicle. The Engineer Story 7, 1-4.
  • Esmam Zahan and Ali Farokhi Nejad (2024). Parametric study of engagement process of shifting mechanism in an automotive gearbox. The Engineer Story 7, 5-8.
  • Xinzhi Liu, Suhaidi Shafie, Mohd Amran Mohd Radzi and Norhafiz Azis (2024). Temperature-dependent transfer characteristics and thermal model of 200V Schottky P-GaN HEMTs. The Engineer Story 7, 9-12.
  • Nurbahirah Norddin, Suhaidi Shafie and Muhammad Idzdihar Idris (2024). Perovskite as material for third generation solar cells. The Engineer Story 7, 13-15.
  • Mohd Khairul Azizat Johari (2024). Persediaan untuk bekerja sebagai jurutera. The Engineer Story 7, 16-18.
  • Nuraliza, N., Muhammad Irsyaduddin Abdul Salam, Ili F. Mohamad Ali Nasri, Wan Nursheila Wan Jusoh (2024). The impact of a lateral sliding triboelectric nanogenerator on energy harvesting. The Engineer Story 7, 19-23.
  • Samuel Omojola Ejiko, Koleola Ebenezer Ojaomo, Abidemi Oreoluwa Filani (2024). Fourier series trend-based model development for azimuth prediction. The Engineer Story 7, 24-28.
  • Tunji John Erinle, Koleola Ebenezer Ojaomo, Abiola Samuel Ajayi (2024). From pixels to prototypes: The engineer's exploration of additive manufacturing. The Engineer Story 7, 29-35.
  • Norezatul Shahirah Ahmad Zamanhuri, Siti Fatimah Ibrahim, Lusi Ernawati, Bernard Maringgal, Daniel Joe Dailin and Norzahir Sapawe (2024). Photocatalytic degradation of pharmaceutical compound in aqueous solution by Nickel bead catalyst. The Engineer Story 7, 36-38.

VOLUME 6.
27 DECEMBER 2023.
HOSTED BY FKM LAB MANAGEMENT, UTM.
  • Mohd Zarieth Hafiz Mat Hussain (2023). Manufacturability analysis of complex parts produced using stereolithography (SLA) technique. The Engineer Story 6, 1-6.
  • Roslin Yasak, Khidzir Zakaria, M. Azlan Suhaimi, N. Hanani A. Rahman (2023). MULA PRO: Alat bantuan pengajaran dan memperkasakan pendidikan STEM dan TVET. The Engineer Story 6, 7-8.
  • M. Shukri Ansar, Khairani Nasir, Fadzlun Nadrah Sharuddin (2023). Optimizing water quality for water tube steam boiler: A Comprehensive testing at external water treatment. The Engineer Story 6, 9-12.


VOLUME 5.
17 OCTOBER 2023.
HOSTED BY MATERIALS RESEARCH AND CONSULTANCY GROUP (MRCG).
MATERIAL LAB, FKM, UTM.
  • Nuhu, I., Yajid, M.A.M., Awang, N., (2023). A practical facility for testing the performance of materials for cryogenic insulation applications. The Engineer Story 5, 1-2.
  • Mudassar Hussain , Abdullah Sani Mohd Najib, Nor Akmal Fadil, Tuty Asma Abu Bakar (2023). High entrophy alloy and their future prospects. The Engineer Story 5, 3-6.
  • Layla Haythoor Kharboot, Tuty Asma Abu Bakar, Abdillah Sani Mohd Najib, Norhuda Hidayah Nordin, Nor Akmal Fadil (2023). Solar cells: A source of Renewable Energy. The Engineer Story 5, 7-11.

VOLUME 4.
22 AUGUST 2023.
HOSTED BY COMPUTATIONAL FLUID MECHANICS RESEARCH GROUP (CFM).
FLUID MECHANICS LAB, FKM, UTM.
  • Mohd Akmal Masud, Mohd Zamani Ngali and Siti Amira Othman (2023). 3D U-Net segmentation layer effected on spect imaging volume targeted. The Engineer Story 4, 1-4.
  • Tan Beng Chiat (2023). Ultra supercritical coal fired power plant. The Engineer Story 4, 5-7.
  • Chua Kai Feng and Muhammad Noor Afiq Witri Muhammad Yazid (2023). Effect on computational domain size for flow through perforated plate. The Engineer Story 4, 8-11.
  • Muhammad Syazwan Hanafi, Syahrullail Samion and Mohd Azman Abas (2023). Tribology analysis of new generation piston ring. The Engineer Story 4, 12-15.

VOLUME 3.
13 JUNE 2023.
HOSTED BY ADVANCED MANUFACTURING RESEARCH GROUP (AMRG).
PRODUCTION LAB, FKM, UTM.
  • Ali Farokhi Nejad and Mohd Nasir Tamin (2023). Root cause failure analysis for the nozzle side of shell and tube type heat exchanger. The Engineer Story 3, 1-2.
  • Zhang Wenchao, Mohd Faridh Ahmad Zaharudin, Wan Fahmin Faiz Wan Ali (2023). Mechanical product design and development process in China. The Engineer Story 3, 3.
  • Jamaludin, J. and Suhaimi, M.A., (2023). Direct laser metal deposition and industrial application. The Engineer Story 3, 4-6.
  • Muhammad Juzaili Hisam, Mohd Azlan Suhaimi, Safian Sharif, Erween Abd Rahim (2023). Effect of cooling method on high-speed machining Inconel 718. The Engineer Story 3, 7-10.

VOLUME 2.
18 APRIL 2023.
HOSTED BY AEROLAB.
AERONAUTIC LAB, FKM, UTM.
  • Salleh, M.B. and Kamaruddin, N.M., (2023). Performance of a Savonius Turbine with winglet-inspired deflectors. The Engineer Story 2, 1-4.
  • Ojaomo, K.E., Syahrullail, S., Mohd Zamri Yusop and Fazila Mohd Zawawi (2023). Anti-oxidation additives in palm oil lubricant towards a sustainable lubrication approach. The Engineer Story 2, 5-8.
  • Khushairi Amri Kasim, Shabudin Mat and Shuhaimi Mansor. Development of UCAV aerodynamics in UTM. The Engineer Story 2, 9-14.


VOLUME 1.
20 FEBRUARY 2023.
DK2, E07, FKM, UTM.
  • Aiman, Y. and Syahrullail, S., (2023). Modelling the open-closed forging using different type of palm oil derivatives. The Engineer Story 1, 1-4.
  • Nur Shahirah Mohamed Nasir dan Nurul Aini Mohd Ahyan (2023). Penguasaan kemahiran fizikal pelajar pekak bidang TVET melalui pembelajaran berasaskan pengalaman. The Engineer Story 1, 5-8.
  • Aisyah, R., Najah, M.I., and Adzila, S., (2023). Study of hardness and density of Polyhydroxyalkanoate (PHA) reinforced with Biphasic Calcium Phosphate (BCP) from eggshell waste. The Engineer Story 1, 9-11.
  • Nur Farahalya Razhali and Ishkrizat Taib (2023). Analysis of hemodynamic effect on different stent strur configuration in femoral popliteal artery for physiological condition. The Engineer Story 1, 12-15.
  • Nur Amani Hanis Roseman and Ishkrizat Taib (2023). Flow characteristics of bifurcated carotid artery at different physiological conditions. The Engineer Story 1, 16-19.
  • Ishkrizat Taib and Hazimuddin Halif (2023). Preferential flow in gas mask filter. The Engineer Story 1, 20-22.
  • M. Saddam Kamarudin and Ishkrizat Taib (2023). Analysis of temperature distribution on the breast cancer tumour. The Engineer Story 1, 23-26.
  • Lavine, W., Jamal, M.H. and Kasiman, E.H., (2023). Numerical simulation of oil spill drift. The Engineer Story 1, 27-29.